Need help?Do you have a question about the Synergy SG900 and is the answer not in the manual?
Remove protective plastic and keep documentation.
Details on gas type, dimensions, weight, and connections.
Recommendations for grill placement and clearances.
Requirements for proper airflow and removal of combustion by-products.
Requirements for incoming gas pressure and piping.
Details on power requirements and earthing for flame rectification.
Notes that water supply is not applicable to this appliance.
Procedures for operating the automated ignition and shutdown.
Procedures for purging air from gas lines before pressure checks.
Detailed steps for measuring and adjusting gas pressures.
Testing gas carrying joints and components for leaks.
Steps to swap natural gas jets for LPG jets.
Adjusting the regulator for LPG using a blocking pin.
Instructions for applying the LPG data plate.
Procedure to verify the gas valve's operational status.
Information on converting back to natural gas from LPG.
Steps to swap LPG jets back for natural gas jets.
Restoring the gas valve regulator to natural gas settings.
List of tools needed for servicing and cleaning tasks.
Troubleshooting common flame issues and their causes.
Step-by-step guide to replacing the appliance ignitor.
Instructions for replacing a faulty gas valve.
Procedure for replacing the main control unit.
Steps to replace the appliance's cooling fan.
Guidelines for cleaning burners and jets to prevent issues.
Contact information for issues not covered in the guide.
To Next Page
General