Synetica enLink OAQ - User Manual

SYNETICA enLink OAQ Quick Start Guide Rev 1.5
Quick Start Guide
enLink OAQ
Wireless Outdoor Air Quality Monitor
• LoRa long range wireless
• Battery or externally powered
• Built in sensor options for:
• Temperature (°C)
• Humidity (%RH)
• Barometric Pressure (Pa)
• Volatile Organic Compounds (VOC’s)
• EPA Air Quality Index (AQI)
• Carbon Dioxide (CO
2
)*
• Sound (dB)*
• Particles PM 1, 2.5, 4, 10*
• Ozone (O
3
)*
• One additional gas from CH
2
O (Formaldehyde), CO, NO
2
, H
2
S, SO
2
, O
2
. *
Temperature
Humidity
VOC’s
Pressure
CO
2
Sound
Particles
Ozone
Additional Gases
The enLink OAQ wireless Air Quality Monitor is a precision instrument
which accurately measures up to 10 key environmental parameters
including Temperature, Humidity, VOC’s, Carbon Dioxide, Particulate
Matter (PM1, PM 2.5, PM4 & PM10), EPA AQI (based on O3 and NO2),
Sound Level, Barometric Pressure, Ozone, Formaldehyde, Carbon
Monoxide, Nitrogen Dioxide, Hydrogen Sulphide, Sulphur Dioxide and
Oxygen.
Readings are transmitted to the cloud using long range LoRa wireless,
where the data can be displayed and analysed.
A built in USB port allows all parameters including air quality data,
wireless signal strength and wireless network configuration to be
viewed and set using simple menus via any USB enabled host such as
a PC or Mac.
Features
• Multiple sensor options*
• LoRa long range wireless
• Frequency Range 863-870MHz*
• Frequency Range 902-928MHz*
• Up to +18dBm Tx Power
• Built in USB port for configuration
• Battery or externally powered
• CE / FCC compliant
• RoHS compliant
• Made in the UK
*Model dependent

Summary

Introduction to enLink OAQ

Key Features Overview

Highlights the main capabilities and sensor options of the enLink OAQ.

LoRaWAN Device Configuration

Activation Methods (OTAA vs ABP)

Explains Over-the-Air-Activation (OTAA) and Activation-by-Personalisation (ABP) for LoRa devices.

Required OTAA Parameters

Details the essential DevEUI, AppEUI, and AppKey for OTAA configuration.

Joining enLink Devices to LoRa Network

Setting LoRa Network Keys

Device Status and Configuration Menus

Live Display Menu

Accessing the live data screen for real-time readings and device status.

Configuration Menu

Navigating the menu to view sensor readings and change device behaviour.

CO2 Sensor Auto Calibration

Particulate Sensor Configuration

Battery Installation and Safety

Approved Battery Specifications

Details the required 3.6V Lithium Thionyl Chloride batteries and warnings.

Battery Handling Guidance

Provides essential safety instructions for installing and handling batteries.

OAQ Mounting Guidelines

Technical Support and Dimensions

Device Dimensions

Provides physical dimensions and mounting screw specifications for the OAQ unit.

Contacting Technical Support

Information on how to get technical assistance via website or email.

Synetica enLink OAQ Specifications

General

Brand	Synetica
Model	enLink OAQ
Category	Security Sensors
Language	English