enLink Status-DP/AF
Differential Pressure / Airflow Sensor User Guide
LoRaWAN Wireless Differential Pressure / Airflow Sensor
• LoRaWAN long range wireless.
• Battery powered.
• High accuracy across a wide range of pressures.
• Status-DP supplied with Duct Fixing Kit to monitor differential pressure.
• Status-AF supplied with Multi-Point Air Velocity Probes measure average velocity pressure across air
ducts. Probe lengths of 100mm to 600mm available.
Status-DP measures differential pressure in the range of 25Pa to
5000Pa with industry leading accuracy of 0.1% of selected range.
Easily detect blocked filters in building ventilation systems to
reduce the risk of spreading disease. Differential Pressure data is
transmitted to the cloud using long range LoRa wireless where the
device data can be displayed and analysed to reveal operational
performance and generate alerts.
enLink Status-AF measures air velocity in the range of 0 to 40m/s
with industry leading accuracy of 0.1%. This sensor can be used to
ensure that recommended air flow rates for public buildings and
industrial plant are achieved. Air velocity data is transmitted using
long range LoRa wireless for integration with cloud services or on-
site systems via Modbus IP to reveal operational performance and
generate alerts.
The units are battery powered with long life of 3+ years
#
.
A built in USB port allows all parameters including pressure ranges,
sampling interval, wireless signal strength and wireless network
configuration to be viewed and set using simple menus via any
USB enabled host such as a PC or Mac.
Features
• Differential pressure and Airflow
monitoring*
• LoRa long range wireless
• Frequency Range 863-870MHz*
• Frequency Range 902-928MHz*
• Up to +16dBm Tx Power
• Built in USB port for power and
configuration
• Battery powered
• CE / FCC compliant
• RoHS compliant
• Made in the UK
*
Option / Model dependent
#
Dependent on settings and environment
To Next Page
Need help?
General