Need help?Do you have a question about the Synthes Electric pen drive and is the answer not in the manual?
General| Brand | Synthes |
|---|---|
| Model | Electric pen drive |
| Category | Power Tool |
| Language | English |
Specifies the intended use and general operational guidelines for the Electric Pen Drive.
Defines the various symbols and their meanings used throughout the manual for clarity.
Details the Standard Console with and without torque limiting, including controls and connections.
Explains the features and connections of the Basic Console for the Electric Pen Drive.
Provides instructions for setting up the Electric Pen Drive console, including color coding.
Explains how to properly connect and mount cables to the consoles.
Details how to adjust the maximum speed using slide controls on the console.
Explains the calibration and operation of the torque limiting function on the Standard Console.
Details the integrated irrigation system functions and modes for cooling surgical tools.
Instructions for inserting, removing, and connecting the Light Adapter for Colibri.
Covers operation, cable mounting, and FWD/REV switchover for the 60k rpm pen.
Highlights specifications and precautions for the 90k rpm Electric Pen Drive.
Instructions for mounting, removing, and operating the Hand Switch.
Details connecting, disconnecting, and operating the 1-pedal Foot Switch.
Explains connecting, disconnecting, and operating the 2-pedal Foot Switch.
Covers mounting, removing attachments, and general precautions for their use.
Describes various drill attachments, their mounting, and specific types.
Details screw attachments and instructions for their mounting and removal.
Explains the Kirschner Wire Attachment and how to mount/remove wires.
Covers working with saw attachments, handling blades, and changing them.
Details burr attachments, changing burrs, handling, and precautions.
Describes the adapter for using dental handpieces with the EPD system.
Details the perforator, changing trepan burrs, and safety precautions.
Instructions for changing the cranial perforator and related precautions.
Describes the craniotome attachment, changing burrs, and safety precautions.
Covers intended use, single use, packaging, cooling, and disposal of cutting tools.
Provides general guidelines on instrument care, handling pathogens, and processing instructions.
Instructions for preparing instruments for cleaning and disinfection in the OR and during transport.
Details manual and automated cleaning and disinfection procedures for system components.
Explains maintenance using the Synthes Maintenance Unit and manual oiling procedures.
Covers inspection, packaging, steam sterilization parameters, and storage conditions.
Information on sending the tool for repair, handling faulty devices, and replacing fuses.
Guidance on the proper disposal of the device, adhering to environmental regulations.
Lists common causes and remedies for the Electric Pen Drive not starting.
Troubleshooting steps for unexpected machine stoppage, including overheating.
Addresses issues with coupling attachments to the unit, often due to deposits.
Solutions for difficulty coupling various tools like saw blades, drills, or burrs.
Addresses overheating issues caused by blunt cutting edges or improper use.
Solutions for incorrect stored torque values, including recalibration procedures.
Troubleshooting for the irrigation pump running in the wrong direction.
Diagnosing and fixing issues with the Hand Switch, potentially due to magnets.
Troubleshooting when the console LED flashes, indicating a potential defect.
Resolving flashing LED for torque limiting when CAL is selected on the console.
Troubleshooting the torque limiting LED flashing when using the 60k Pen.
Resolving issues preventing repeated calibration attempts without intermediate steps.
Steps to correctly calibrate the torque setting for the system.
Troubleshooting when the 90,000 rpm Electric Pen Drive is not functioning.
Presents detailed technical specifications for Pens, Consoles, and Foot Switches.
Details recommended duty cycles for attachments to prevent overheating during operation.
Declares sound pressure and power levels according to EU directives for noise emissions.
Declares vibration emission levels and daily exposure times as per EU directives.
Provides documentation regarding EMC standards and manufacturer declarations.
Manufacturer's declaration regarding electromagnetic emissions and compliance.
Manufacturer's declaration on electromagnetic immunity for all device components.
Guidance on immunity for non-life-supporting devices and RF separation distances.
Provides recommended separation distances for RF communication equipment to prevent interference.
Lists console part numbers and descriptions for ordering purposes.
Lists handpiece part numbers and descriptions for ordering purposes.
Lists hand switch part numbers and descriptions for ordering purposes.
Lists foot switch part numbers and descriptions for ordering purposes.
Lists cable part numbers and descriptions for ordering purposes.
Lists Vario Case part numbers and descriptions for ordering purposes.
Lists attachments compatible with the 60,000 rpm Pen Drive.
Lists attachments compatible with both 60k and 90k Pen Drives.
Lists torque calibration unit part numbers for ordering.
Lists various accessories like irrigation nozzles and maintenance supplies.
Directs users to a specific brochure for ordering cutting tools.
To Next Page
