An extremely easy-to-use device for creating smooth
panning motion time-lapse or real-time video. Wirelessly
connect to the Genie Mini using the Syrp Genie App for
quick setup and simple motion control.
This Quick Start Guide will take you through the basics to
get you started using your Genie Mini for the first time.
A full user manual can be found on the support page at
www.syrp.co.nz
Genie Mini
Whats in the Box
Syrp Micro Fiber cloth
USB charging cabl
e
Genie Mini
1/4” to 3/8” Thread adapter
(screwed into the base)
Genie Mini Interface
Camera port
Sync port
Charging port
On/off button
Charging light
Camera
recording light
Bluetooth light
Charging
Orange light indicates
charging, green is
charged
Plug the Micro-USB plug into
the Genie Mini charging port.
2
Plug the USB cable into a wall
charger, laptop or USB port.
1
Quick Start Guide
1 2
3 4
5
Mount the Genie Mini
2
1
Screw the Genie Mini to a tripod head or tripod legs.
The thread adapter in the base can be used for
smaller threads.
Screw your camera to the top of the Genie Mini.
Try a ballhead between
the camera & Genie Mini
to easily frame your shots
6