（2）Setup unlock way：（Factory default : read valid cards unlock）
Press 100 + # Read valid cards unlock
Press 101 + # Read valid cards and input valid code unlock
Press 102 + # Read valid cards or input valid code unlock
Note: If unlock by card + code, you need type the code within 10s after
reading the card, Only type private code can’t open the door.
﹙3﹚Add User ID cards：
Press 2 + code + read cards + #
Continuous increasing cards: read the second card after pressing #, and
the codes No, will be given automatically. and press # to confirm. card code is
4 unrepeatable No.（0001-0500）
﹙4﹚Delete user cards：
Press 30000 + # to delete all user cards
Press 3 + read cards + # Delete all read cards
Press 3 + card code + # delete corresponding cards
（5）Setup unlock time(Factory default is 3 seconds）
Press 4 + Time + # time , Time : double digits ，unit : seconds。
﹙6﹚Security model：（Default setting: close）
Press 700 + # Close security function
Press 701 + # Open security function
Note: Use 5 invalid cards consecutively or use valid card but use invalid code
5 times, the system will dead lock 5 minutes.
To Next Page
Loading...