EasyManua.ls Logo

SystemAir ESSVENT - Page 9

SystemAir ESSVENT
14 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
______________________________________________________________________________________________________
Essvent Operation and maintenance instructions
200513 Systemair AB
9
GB
Cleaning the impeller
The impeller should be cleaned at least once a
year.
No tools are needed for dismounting or
mounting of the impeller. Be careful not to
damage the impeller.
Turn off the power, (by unplugging the electric
cable and snap-on contact to the cooker hood).
Open the front hatch, see fig.
Open the lid
Remove the impeller: Hold the rotor and
turn the impeller (bayonet-mount)
clockwise
The impeller can be washed in a
dishwasher or by hand
Attach the impeller: Hold the rotor and turn
the impeller anticlockwise as far as
possible.
Close the lid and hatch
Connect the snap-on contact and the plug
If the fan does not work
Turn off the power!
Manual thermal contact (SP1) is reset by
disconnecting the mains for approx. 10 -
60min
If the fan does not start after resetting the
thermal contact, contact your retailer.
THE FAN SHOULD NOT BE TURNED OFF other than at cleaning or servicing!
Always turn off the power prior to clean ing or servicing the unit!
Risk of fire, abnormal wear and noise will increase if the fan is not maintained according to the
instructions.
Individuals with reduced psychological capacity (even children) should not use the fan.
Children are to be instructed not to play with the fan

Related product manuals