To Next PageTo Next Page
Need help?Do you have a question about the SystemAir EX Series and is the answer not in the manual?
General| Insulation Class | F |
|---|---|
| Protection Class | IP54 |
| Operating Temperature | -20°C to +60°C |
| Voltage | 230V |
| Frequency | 50Hz |
Explains hazard, warning, and note symbols, and how instructions are presented.
Details the intended application and limitations of EX fans.
Lists hazardous and incorrect ways of using EX fans.
Covers responsibilities, directives, and general precautions for EX fans.
Outlines the qualifications needed for assembly and electrical work.
Details the qualifications for operating, maintaining, and cleaning EX fans.
Warns about risks associated with unauthorized personnel in the work area.
Specifies required personal protective equipment for safe operation.
Describes built-in safety features like thermo-contacts for overheating protection.
Details the condition of fans upon leaving the factory and packaging.
Provides instructions and warnings for safe transportation of EX fans.
Guidelines for storing EX fans to maintain functionality and prevent damage.
Explains ATEX identification markings and provides examples.
Details the ATEX certification for different fan types.
Presents key technical specifications for various EX fan models.
Introduces the AW-EX series, including types, description, and designation.
Covers types, description, and technical details for AXCBF-EX/AXC-EX series.
Details types, description, and designation for RVK-EX duct fans.
Describes types, description, and designation for DVEX roof fans.
General safety precautions to be followed during the assembly process.
Specific preconditions and assembly steps for AW-EX, AXC-EX, AXCBF-EX fans.
Preconditions and assembly guidelines for RVK-EX duct fans.
Preconditions and assembly instructions for DVEX roof fans.
Critical safety precautions for electrical connections in hazardous areas.
Specific electrical connection procedures for AW/AXC/AXCBF-EX fans.
Steps for connecting RVK-EX duct fans, including earthing and protection.
Electrical connection and installation requirements for DVEX roof fans.
Guidelines for setting the motor protection device cut-out time.
Recommendations for preventing two-phased runs in 3-phase motors.
How to connect a temperature monitor to the motor protection device.
Lists essential conditions that must be met before commissioning EX fans.
Specific pre-commissioning checks for AW-EX, RVK-EX, and DVEX series.
Conditions related to current and voltage for speed-variable fans.
Steps for checking air gaps, rotation direction, and switching on.
Crucial safety warnings for operating EX fans in explosive atmospheres.
Specifies conditions for safe and correct operation of EX fans.
Guidance on switching on, monitoring, and switching off EX fans.
Recommended frequency for performing maintenance tasks.
Procedures and safety precautions for cleaning EX fans.
Guidelines for general maintenance, repairs, and bearing replacement.
Information on ordering accessories for EX fans.
Common faults, possible causes, and remedies for EX fans.
Instructions for the proper disposal of EX fans and packaging.
EC Declaration of Conformity for AW-EX low-pressure axial fans.
