EasyManuals Logo

SystemAir NOVA drive 370 User Manual

SystemAir NOVA drive 370
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
|
Systemair NOVA drive 370
1 Safety information
Before the installation and power supplying the drive, carefully read the instructions. The manufacturer is not responsi-
ble for incorrect installation and use of device. Please refer to section 6 for mechanical and electrical installation guide-
lines.
The appliance is intended to be installed only by a qualified person. Do not install or use a device which appears to be
damaged.
When connected to power the appliance must be grounded. Make sure the electrical installation on the rating plate
matches the power supply. Please refer to Table 2 for maximum fuse ratings and type.
CAUTION: Risk of hot surfaces and electric shock if the unit has been running! If service is required, please wait mini-
mum 5 minutes after power is disconnected before operating the unit.
2 Product description
Figure 1 – Illustration of the NOVA RHC 370 enclosure.
3 Environmental constraints
Storage Environment
Ambient temperature ºC -40°C to +70°C
Ambient humidity % RH 10% to 95% RH (Non condensing)
Altitude m 0 to 2000 m
Working Environment
Ambient temperature ºC -40 ºC to +40 ºC
Ambient humidity % RH 10% to 95% RH (Non condensing)
Altitude m 0 to 2000 m
Table 1: Environment

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SystemAir NOVA drive 370 and is the answer not in the manual?

SystemAir NOVA drive 370 Specifications

General IconGeneral
BrandSystemAir
ModelNOVA drive 370
CategoryDC Drives
LanguageEnglish