SystemAir Topvex Series - HW Installation in Topvex TR800-4000 (Pre-Heat)

Topvex Series HWC - Hot Water Coil,
ELP - Electric Pre-Heater installation instructions
Systemair Inc.
9
8
Use the control panel to program the unit for water
heating. See chapter 2.5 on how to do software
conguration.
2.5 HW Installation in Topvex TR800-4000 (Pre-Heat)
1
Insert the water heating coil as illustrated in the
gure.
2
Connect plug and outdoor air sensor onto existing
bracket.