SyxthSense DTP-A80-BC - User Manual

Product Sheet TH6.21
Thermostat Type DTPA80BC
Online Store: www.syxthsense.com
Enquiries: T: 0870 20 80 100 F: 0870 20 80 200 PS TH6.21 – 1/6
DTPA80BC Wireless Thermostats
Model Types
Model Description
DTP-A80-BC
DTP-A80-BC Wireless Thermostat with Operation Mode Switch
DTP-A80-BC02 DTP-A80-BC02 Wireless Thermostat
DTP-A80-BC-TP DTP-A80-BC-TP Wireless Tamperproof Thermostat (setpoint under
cover)
Technical Data
Power supply 2 x 1.5V= alkaline batteries AAA type
Batteries duration > 5 years
Regulation range 6°C .. 30°C
Accuracy ± 1°C
Hysteresis 0.3°C
Resolution 1°C
Sensor type NTC 100k @ 25°C internal
Remote sensor
(optional)
STL OTS A 150
(Max. remote sensor wire length 3m)
Frequency 868.35 MHz
Modulation type AM (ASK)
Output power (ERP) < 25 mW
Antenna type: Internal
Max. distance from
receiver
30 m indoor (depending on the environment)
Storage Temperature -10°C .. +50°C
Operating Temperature 0°C .. 40°C
Protection Class IP30
Humidity Limits 20% .. 80% rH (non condensing)
Enclosure Material: ABS V0 self-extinguishing
Colour Signal white (RAL 9003)
Agency Compliance EEC 89/336, 73/23, 93/68, 99/05
This room electronic thermostat is suitable for a reliable and accurate
temperature regulation in commercial and industrial premises as well as
in home installations. Its main feature is the capability of operation
without any wire connection: the on/off commands are issued to the
receiving unit via radio signals, making this product extremely easy and
economical to install especially where no existing electrical wires are
available.
FEATURES
• Completely wireless thermostat 868.35 MHz band
• Programmable 3°C reduction
• Low battery indication
• Knob limitation feature through mechanical pins
• Fixing with distance between holes 60 mm.
• Compliant with directives EEC 89/336, 73/23, 93/68, 99/05

Summary

Operation

Heating and Cooling Modes

Thermostat controls heating or cooling systems via internal jumper JP3.

Night Reduction Feature

Programmable 3°C reduction for energy saving during specific periods.

System Start-Up

Initial Test Procedure

Testing receiver signals before installation and setting dip switches.

Battery Insertion and Reset

Maintenance

Battery Replacement

Replacing batteries when the red LED indicator flashes.

Appendix A: Dip-switch and address setting

Understanding Dip-switches

Information on 8-way dip-switches for setting unique thermostat addresses.

Setting the Address Code

Troubleshooting

Heating Mode LED Status

SyxthSense DTP-A80-BC Specifications