t.a.c. TAC Xenta 511 User Manual

TAC Xenta 511 and 911 Handbook 1 Introduction
TAC AB, 16 May 2003 0-004-7870-0 (EN), 7 (32)
1 Introduction
The TAC Xenta 511 and TAC Xenta 911 are communication devices,
partly based on similar hardware.
This handbook describes the hardware installation and technical data
for these devices.
For more information on applications and using the devices in net-
works, please refer to the documentation listed below.
The TAC Xenta 511 and 911, as well as other products mentioned in
this manual, must not be used for any other purposes than those for
which they were designed.
Installation, connection and repair should only be carried out by autho-
rized personnel.
1.1 Structure
This handbook has the following content:
Chapter 2
Lists technical information about the TAC Xenta 511, including infor-
mation about how to install the device.
Chapter 3
Lists technical information about the TAC Xenta 911, including infor-
mation about how to install the device.
Note!
We are continuously improving and correcting our documentation.
This manual may have been updated.
Please check our DocNet site at www.tac.com for the latest version.

t.a.c. TAC Xenta 511 Specifications

General

Brand	t.a.c.
Model	TAC Xenta 511
Category	Server
Language	English