Need help?Do you have a question about the t.amp E-1500 and is the answer not in the manual?
General| Amplifier type | Class D |
|---|---|
| Channels | 2 |
| Frequency response | 20 Hz - 20 kHz |
| THD | < 0.05% |
| S/N ratio | > 100 dB |
| Height | 2U |
| Input impedance | 20 kOhm |
| Connectors | XLR, Speakon |
| Protection | Short circuit, DC, Overload |
| Cooling | Fan cooling |
| Input Sensitivity | 0.775V |
Guides users to the website for PDF downloads, keyword search, online guides, and technical support.
Explains letterings, symbols, and signal words used for clarity and safety in the manual.
Illustrates warning signs for high-voltage and danger zones and explains their associated risks.
Defines the device's proper application and specifies the user's required abilities and knowledge.
Addresses risks like choking hazards for children and electric shock from high internal voltages.
Details risks of electric shock from short circuits, fire hazards, and proper cabling for safety.
Warns about hearing damage from high volumes and specifies safe operating conditions for temperature and environment.
Advises on correct power supply connection and warns about magnetic fields interfering with sensitive devices.
Emphasizes using the correct fuse type to prevent unit damage and fire hazards.
Lists the power output in Watts (W) for different impedance loads (4Ω, 8Ω) for various models.
Details the available input types (XLR, phone jack, RCA) and output connectors (Speaker Twist, terminal clamps).
Describes protection circuits (DC, short circuit, over-temperature, limiter) and the defeatable standby function.
Guides on unpacking, checking for damage, keeping packaging, and creating connections while the device is off.
Warns about high voltages at the amplifier output and advises against touching bare loudspeaker cable ends when on.
Warns about magnetic fields interfering with sensitive devices and advises on rack placement.
Explains and illustrates Stereo, Parallel, and Bridged operation modes for the amplifier.
Details how to connect loudspeakers, manage impedance, and calculate total impedance in series and parallel.
Specifies that the device is designed for standard 19-inch racks and occupies two rack units.
Identifies front panel components like the power switch, LED panel, and volume controls (Channel A/B).
Explains the functions of front panel LEDs: CLIP, PRO, POWER, PAR, BR, and SIG.
Details rear panel components for E-400: IEC plug, standby switch, outputs, and inputs.
Explains OUTPUT, INPUT, GROUND/LIFT switch, LIMITER, and selector switches for E-400.
Identifies rear panel components for E-800: power cord, standby switch, breaker, outputs, and inputs.
Explains BREAKER, OUTPUT, INPUT, GROUND/LIFT, LIMITER, and selector switches for E-800.
Details rear panel components for E-1200/E-1500: IEC plug, outputs, and inputs.
Explains INPUT connectors and selector switch for operating mode on E-1200/E-1500.
Lists amp class, input connections (XLR, phone, RCA), impedance, and output connections (Twist, terminals).
Provides output power (RMS) for 8Ω stereo, 4Ω stereo, and 8Ω bridged modes for E-400 and E-800.
Details frequency response, signal-to-noise ratio, THD, damping factor, sensitivity, and gain.
Lists power consumption, inrush current, and supply voltage specifications for E-400 and E-800.
Specifies fuse types, physical dimensions (W×H×D), weight, and operating ambient conditions.
Lists amp class, input connections (XLR), impedance, and output connections (Twist, terminals) for E-1200/E-1500.
Provides output power (RMS) for 8Ω stereo, 4Ω stereo, and 8Ω bridged modes for E-1200 and E-1500.
Details THD, damping factor, sensitivity, gain, attack time, and power consumption for E-1200/E-1500.
Lists inrush current, supply voltage, and fuse specifications for E-1200 and E-1500.
Provides dimensions (W×H×D), weight, temperature range, and relative humidity for E-1200/E-1500.
States whether the devices are 2Ω stable and if they feature DSP or crossover functionality.
Helps select right cables and plugs for perfect sound, warning about incorrect connections.
Explains unbalanced and balanced transmission, their uses, and susceptibility to interference.
Details pin assignments for 1/4" TS (mono, unbalanced) and TRS (mono/stereo, balanced/unbalanced) phone plugs.
Explains pin assignments for balanced (4-pin) and unbalanced (3-pin) XLR plugs.
Details pin assignments for Speaker Twist chassis connectors and RCA plugs for signal and ground.
Provides instructions for cleaning fan grids using pH-neutral, solvent-free agents and a damp cloth.
Advises on environmentally friendly disposal of packaging materials, emphasizing recycling.
Explains disposal of old devices according to WEEE directive, recommending approved waste firms or local facilities.
To Next Page
