Need help?Do you have a question about the t.amp S-100 and is the answer not in the manual?
General| Power Output | 100W |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion (THD) | < 0.1% |
| Signal-to-Noise Ratio | > 90 dB |
| Input Sensitivity | 0.775V |
| Outputs | Speakon, Binding Posts |
| Dimensions | 482 mm x 44 mm x 244 mm (19" / 1U) |
| Inputs | XLR |
Congratulates the user and provides context for reading the manual.
Explains critical safety symbols like Danger, Warning, and Magnetic Field cautions.
Details precautions against electric shock, including proper earthing and avoiding water.
Warns about fire hazards like covering vents, direct sunlight, and open flames.
Advises on keeping children away and ensuring stable placement to prevent injury.
Identifies and describes front panel controls and indicators like CLIP and Level controllers.
Details rear panel inputs, outputs, switches, and connectors like Speakon and XLR.
Guides on checking for damage, handling packaging, and rack installation.
Crucial advice on voltage, liquids, input signals, and output connections.
Reinforces safety checks before operation, including supply voltage and power switch.
Explains balanced and unbalanced input connections using XLR and jackplugs.
Details how to connect speakers using cable shoes, bare wires, or Speakon connectors.
Details how to select stereo, parallel, or bridged mono operation using a toggle switch.
Describes how to set input sensitivity for different signal levels (0.77V/1.4V).
Explains the power switch operation and using input level controllers for optimal headroom.
Covers ground lift switch functionality and the importance of speaker load limits.
Warns against switching on too many devices simultaneously to prevent circuit overload.
Provides instructions on how to dispose of the device and packaging environmentally.
Lists specifications like output power, frequency response, input sensitivity, and dimensions.
To Next Page
