T.BONE SC 420 - User Manual

To Next Page

SC 420 USB Desktop Set

Quick start guide

This document contains important information on the safe use of the product. Read and follow the safety instructions and all other instructions.

Keep the document for future reference. If you pass the product on to others, please include this document.

Contents are subject to change. Please refer to the latest version of the documentation, which is ready for download under www.thomann.de.

Safety instructions

Intended use

This product is designed to convert acoustic signals into electrical sig-

nals. Any other use or use under other operating conditions is consid-

ered to be improper and may result in personal injury or property dam-

age. No liability will be assumed for damage resulting from improper

use. This device may be used only by persons with sufcient physical,

sensory, and intellectual abilities and having corresponding knowledge

and experience. Other persons may use this device only if they are su-

pervised or instructed by a person who is responsible for their safety.

Risk of injury and choking hazard for children!

Children can suffocate on packaging material and small parts.

Children can injure themselves when handling the product.

Never allow children to play with the packaging material and the

product. Always store packaging material out of the reach of

babies and small children. Always dispose of packaging material

properly when it is not in use. Never allow children to use the

product without supervision. Keep small parts away from

children and make sure that the product does not shed any

small parts that children could play with.

Possible hearing damage due to high volumes on headphones!

The use of headphones at high volumes may result in perma-

nent hearing impairment. Over an extended period of time, even

levels that seem to be uncritical can cause hearing damage.

Avoid operating headphones at high volumes, in particular over

an extended period of time.

Caution

 Never remove the screen of the microphone! This action could

damage the sensitive microphone capsule.

 Prevent the microphone from falling down, as this can cause serious

damage!

 After every use, remove the microphone from the holder and place it

in its transport packaging.

 Use only a slightly moist cloth for cleaning.

Operating location

Never use this product:

 in direct sunlight

 in conditions of extreme temperature or humidity

 in extremely dusty or dirty places

 in locations where the device may get wet

 in the vicinity of magnetic elds

General handling

 To prevent damage, never exert force while operating the device.

 Never immerse the device in water. Wipe only with a clean and

dry cloth. Do not use liquid cleaners such as benzene, thinners or

ammable cleaning agents

Keep the device away from impurities!

Keep the device away containers with liquid. Should liquid enter the

device, this could lead to its destruction or re. Ensure that no metallic

parts enter the device.

Features

 USB large diaphragm studio microphone with USB port for direct

operation on a computer

 No additional drivers necessary

 Headphone output with direct monitoring

 MUTE button

 In a PVC case, including shock mount, USB cable, foam windshield,

popkiller and desktop stand

 Available in black (item no. 439002) and silver (item no. 493567)

Operating elements

1. Microphone head

2. MUTE button with LED

3. Shock mount

4. Desktop stand

5. USB connection for use with a computer

6. Popkiller

7. Headphone output

Operating the device

1. Attach the microphone in the shock mount on the desktop stand.

2. Use the included USB cable to connect the USB port of the micro-

phone to the USB port of a computer (Windows® or Mac OS®). The red

LED lights up. The computer detects the device and automatically

installs the required driver.

3. If you are using a computer with the Windows® operating system,

you can congure the device as required via System Settings –

Sound – Recording.

4. If you are using a computer with the Mac OS® operating system, you

can congure the device as required via System Settings – Sound –

Input.

5. To mute the microphone, press the MUTE button. The red LED in the

button will ash. To unmute, press the MUTE button again. The LED will

once again light up permanently.

6. You can use the headphone output to connect headphones with

a 3.5-mm jack plug for latency-free monitoring.

Need help?

Do you have a question about the T.BONE SC 420 and is the answer not in the manual?

Summary

Safety Instructions and Precautions

Intended Use

Defines the product's designed purpose and limitations for proper operation and safety.

Child Safety Hazards

Alerts to risks of suffocation and injury from packaging and small parts for children.

Hearing Damage Warning

Warns about permanent hearing impairment from prolonged high volume headphone use.

General Handling and Operating Precautions

Covers microphone handling, safe operating locations, general care, and impurity avoidance.

Product Features and Operation

Product Features

Lists key attributes like USB connectivity, direct monitoring, and included accessories.

Operating Elements

Identifies and briefly describes the physical controls and parts of the device.

Operating the Device

Provides step-by-step instructions for connecting, configuring, and using the microphone.

The t.bone SC 420 USB Desktop Set is a large diaphragm studio microphone designed for converting acoustic signals into electrical signals, specifically for direct operation with a computer via USB. This set is available in black (item no. 439002) and silver (item no. 493567).

Function Description:

The SC 420 USB is a condenser microphone with a supercardioid polar pattern, making it ideal for capturing sound from a specific direction while minimizing off-axis noise. It features a USB port for direct connection to a computer (Windows® or Mac OS®) without the need for additional drivers, simplifying setup and usage. The microphone also includes a headphone output with a 3.5-mm jack plug for latency-free monitoring, allowing users to hear their audio input in real-time. A MUTE button with an LED indicator provides quick control over the microphone's audio input, flashing when muted and lighting up permanently when active.

Important Technical Specifications:

Connection/Power Supply: USB
Transducer Principle: Condenser
Polar Pattern: Supercardioid
Frequency Range (-10 dB): 80–18,000 Hz
Sampling Rate: 16 Bit/48 kHz
Current Consumption (mA): 150
Dimensions (Ø × D), without shock mount: 51 mm × 187 mm
Thread: 5/8-inch
Weight: 285 g
Temperature Range: 0 °C to 40 °C
Relative Humidity: 20% to 80% (non-condensing)

The frequency response chart shows a relatively flat response across the vocal range, with a slight boost in the higher frequencies, which can add clarity and presence to recordings. The polar pattern diagrams illustrate the supercardioid characteristic, indicating maximum sensitivity directly in front of the microphone and significant rejection from the sides and rear.

Usage Features:

The SC 420 USB Desktop Set comes in a PVC case and includes a shock mount, USB cable, foam windshield, popkiller, and a desktop stand, providing a complete solution for immediate use.

To operate the device:

Assembly: Attach the microphone into the shock mount, and then place it on the desktop stand. The shock mount helps to isolate the microphone from vibrations and handling noise.
Connection: Use the included USB cable to connect the microphone's USB port to a USB port on your computer. Once connected, the red LED on the microphone will light up, indicating power. The computer should automatically detect the device and install the necessary drivers.
Configuration (Windows®): For Windows® operating systems, you can configure the device via "System Settings – Sound – Recording" to adjust input levels and other settings.
Configuration (Mac OS®): For Mac OS® operating systems, configuration can be done via "System Settings – Sound Input."
Mute Function: Press the MUTE button to mute the microphone. The red LED in the button will flash to indicate that the microphone is muted. Press the MUTE button again to unmute, and the LED will light up permanently.
Monitoring: Connect headphones with a 3.5-mm jack plug to the headphone output on the microphone for latency-free direct monitoring of your audio.

Safety Instructions and Precautions:

Intended Use: The product is designed for converting acoustic signals into electrical signals. Any other use is considered improper and may result in personal injury or property damage. The device should only be used by individuals with sufficient physical, sensory, and intellectual abilities, or under supervision.
Children: Keep packaging material and small parts away from children to prevent suffocation or injury. Do not allow children to play with the product unsupervised.
Hearing Damage: Using headphones at high volumes for extended periods can cause permanent hearing impairment. Avoid operating headphones at high volumes.
Microphone Handling: Never remove the microphone screen, as this can damage the sensitive capsule. Prevent the microphone from falling to avoid serious damage. After each use, remove the microphone from its holder and store it in its transport packaging.
Operating Location: Avoid using the product in direct sunlight, extreme temperatures or humidity, dusty or dirty places, wet locations, or near magnetic fields.
General Handling: Do not exert force when operating the device. Never immerse the device in water. Clean only with a clean, slightly moist cloth. Do not use liquid cleaners such as benzene, thinners, or flammable cleaning agents.
Impurities: Keep the device away from liquids and metallic parts. Liquid entering the device can lead to destruction or fire.

Maintenance Features:

Cleaning: The microphone should be cleaned using only a slightly moist cloth. Avoid using harsh chemical cleaners like benzene, thinners, or flammable cleaning agents, as these can damage the device.
Storage: After each use, it is recommended to remove the microphone from its holder and place it back in its transport packaging to protect it from dust and physical damage.
Environmental Responsibility: The packaging materials are environmentally friendly and recyclable. Dispose of them properly according to local regulations. The product itself is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) and should not be disposed of with normal household waste. Instead, it should be disposed of through an approved waste disposal firm or local waste management facility, complying with country-specific rules and regulations.

The t.bone SC 420 USB Desktop Set offers a user-friendly and comprehensive solution for recording high-quality audio directly to a computer, suitable for various applications such as podcasting, voiceovers, and home studio recording.