Barking: Eccentric Block Type
Drum Size: Diameter 2.08” (53mm) x Length 5.33” (128mm)
Recommended Battery:650CCA Minimum for Winching
Fairlead: Aluminum Fairlead
Synthetic: Length x Diameter (15m x7.5 mm)
Mounting Bolt Pattern: 6.02"(153mm) x 4.33"(110mm)
Weight: 15KGS(33Lbs)
Overall Dimensions: (LxWxH) 15.08"x5.12"x7.32"(383mm x 130mm
x186mm)
Line Pull Line Speed Motor Current
lbs (kgs) ft/min (m/min) Amps
0 39.4 (12) 40
1000 (454) 21.3 (6.5) 100
1500 (680) 14.8 (4.5) 120
2000 (907) 11.2 (3.4) 140
2500 (1134) 8.9 (2.7) 160
3000 (1360) 7.5 (2.3) 170
3500 (1587) 6.2 (1.8) 190
4000 (1814) 5.6 (1.7) 200
4500 (2040) 5 (1.6) 220
5000(2270) 4.9(1.5) 230
5500(2500) 4.6(1.4) 260
6000(2720) 4.3(1.3) 280
Above performance specs are based on rst layer of drum
Wire rope layer Pulling power Cable Capacity per Layer
1st is closest to drum lbs (kgs) ft(m)
1st 6000 (2720) 11(3.4)
2nd 4850 (2200) 25(7.6)
3rd 4070(1850) 41(12.5)
4th 500 (1260) 59(18)
INTERMITTENT DUTY
ATW6000 is like any other motor driver power tools such as an electric drill
or saw. The electric motor should not be allowed to become excessively hot.
Normally precautions will extend the life of your motor. Keep the duration of
pulls as short as possible. If the end of the motor becomes uncomfortable
hot to touch, stop winching and allow the motor to cool down.
07
To Next Page
Loading...