Grand Central Hub User’s Manual Page 5 of 8
2.3 INSTALLATION
1. Boot GCHub
a. Plug in to network
b. Plug in to power
c. Wait for startup scripts. (~6 seconds after plug in, then will see penguins and scrolling & static
text.) Takes 1-2 mins.
d. Displays splash screen:
e. Pulls latest docker container down
f. Starts the docker container and starts application
g. Displays PIN
2. Authorize GCHub
a. Log in to GCR with NTID
b. Enter PIN
c. GCHub now ready to accept devices
2.4 ARCHITECTURE
Hardware
Docker Container
Hub Application
To Next Page
Loading...