34
Photo mode
PHOTO
To take a photo, make sure that the camera is in Photo mode. If the Photo icon
is not
displayed on the LCD screen of your camera, press «MODE».
To take a photo :
Press
and release the pressure.The camera beeps and the blue status indicator blinks
for every captured shot
Take several photos at once :
In «Burst» mode, your camera takes several photos in a single click. To take a burst of photos,
make sure that the camera is in «Burst» mode. You just have to select the number of shot
that you want for a single click: 3, 5, 10 or 20 photos.
Select the resolution of your photos :
Your camera can take some shots with resolution up to 16 Megapixels.
_Notice_SPCAM4K.indd 34 11/01/2017 16:30
To Next Page
