T.O.M TSR-210 User Manual

SCIE A ONGLET RADIALE - 210 mm
8’’ COMPOUND MITER SAW
KAPP-UND ZUGZÄGE
- 210 mm
TSR-210
Manuel d’utilisation
Operating instructions
Bedienungsanleitung

T.O.M TSR-210 Specifications

General

Brand	T.O.M
Model	TSR-210
Category	Saw
Language	English

Summary

General Safety Instructions

Additional Safety Rules for Mitre Saw

Environment Protection and Electrical Connections

Earthing Instructions

Connect metal masses to earth to prevent shock. Use qualified electrician for socket installation or cord repair.

Items Supplied and Proper Use

Proper Use and Hazards

Defines the intended use of the saw and outlines potential hazards during operation.

Technical Data and Preparation

Technical Specifications

Details the technical specifications of the TSR-210 miter saw.

Pre-Operation Checks

Ensures the machine is correctly mounted, safety devices fitted, and blade runs freely before use.

Assembly and Operation Procedures

Making 90° Crosscuts

Procedure for making straight 90-degree cuts with the turntable set at 0 degrees.

Precision Stop Adjustment for 90° Cuts

Steps to precisely adjust the stop for accurate 90-degree crosscuts.

Making Angled Crosscuts (0°-45°)

Guide for performing angled cuts (mitre cuts) from 0 to 45 degrees.

Mitre Cuts and Rotary Table Settings

Instructions for making mitre cuts and setting the rotary table from 0 to 45 degrees.

Precision Adjustment for 45° Mitre Cuts

Mitre Cuts with Rotary Table Adjustments

Replacing the Saw Blade

Maintenance Procedures