T3 FEATHERWEIGHT LUXE 2i User Manual

8 9
ENGLISH ENGLISH
CHECK ALCI EVERY TIME YOU USE THIS HAIR DRYER
This hair dryer is equipped with an Appliance Leakage Circuit
Interrupter (ALCI), a safety feature that renders it inoperable under
some abnormal conditions, such as immersion in water.
To make sure the ALCI is functioning properly and the exclusive
water sensing system (ALCI) is working, perform the following test:
1. Plug in the hair dryer and press
the test button on the plug.
2. The hair dryer will stop working.
There will be an audible click and
the reset button will pop out
3. To reset the ALCI with a Reset
button: Unplug the unit. Then
push the Reset button in, and
reinsert the plug into the outlet.
4. Be sure to repeat the test every time you use this hair dryer to
confirm the ALCI is operational.
5. If the ALCI is not functioning properly, return the hair dryer to a
service center.
6. If a water immersion occurs, bring this unit into a service
center. Do not try to reset.
Should the dryer go off and the Reset button pop out during
use, this could indicate a malfunction in the dryer. Remove the
plug from the outlet and allow the dryer to cool. Reset the ALCI.
Reinsert the plug into the outlet. The dryer should function
normally. If not, return it to a service center for examination and
repair.
OPERATING INSTRUCTIONS
FEATHERWEIGHT LUXE 2i
RESET
TEST
OPERATING INSTRUCTIONS
FEATHERWEIGHT LUXE 2i
HOW TO OPERATE
Power Switch
selects air speed
Fast airflow
Soft airflow
Turn off
Heat Switch
High
Medium
Low
Cool Shot
SoftTouch 2
Diffuser
Model No. 73804
(Optional)
Concentrator
Outlet
Main Body
Inlet
Cool Shot
Heat Switch
Power Switch
Handle
Cord
Plug
Barrel Brush

T3 FEATHERWEIGHT LUXE 2i Specifications

Power

operating voltage	125V
power consumption	15A