10 11
ENGLISH
ENGLISH
HOW TO USE YOUR
FEATHERWEIGHT LUXE 2i
1
2
3
4
Select desired speed and heat
levels. Fine and processed hair
types should use the Low heat
setting.
Holding the hair dryer 6-8 inches
away, rough dry towel-dried hair
until 70-90% dry.
Divide hair into 3-4 inch sections
and slowly brush through each
section with a round bristle brush.
Apply tension with the brush while
directing the dryer nozzle at the
brush.
Finish by pressing the Cool Shot
and blowing cool air over the
section for a polished look.
MAINTENANCE INSTRUCTIONS
FEATHERWEIGHT LUXE 2i
1. Make sure that the inlet and outlet grills are clear of dust and
lint for proper operating performance.
2. Your hair dryer is virtually maintenance free. No lubrication Is
needed.
3. Always remove the plug from the outlet and allow the dryer to
cool before cleaning.
4. Use a soft cloth, small brush or brush attachment of a
vacuum cleaner to remove dust and lint that may have
accumulated on the metal mesh at the back of the dryer.
5. The hair dryer exterior may be wiped clean with a damp cloth.
6. CAUTION: Never allow the power supply cord to be pulled,
twisted or severely bent. Never wrap the cord tightly around
the dryer. Damage will occur at the high flex point of entry
into the hair dryer, causing it to rupture and short. Inspect the
cord frequently for damage. Stop use immediately if damage
is visible, if the unit stops or if it operates intermittently.
7. If the cord or hair dryer is damaged or does not operate
properly, return it to a service center for repair.
8. This hair dryer has no user serviceable parts. Do not attempt
to repair the appliance yourself.
STORAGE
When not in use, your hair dryer should be disconnected and
stored in a safe, dry location, out of reach of children. Do not
wrap the cord around the dryer. Allow the cord to hang or lie
loose and straight at the point of entry into the hair dryer.
Power Switch
selects air speed
Heat Switch
Cool Shot
To Next Page
Loading...
Need help?
Power
