J
Jesse TorresAug 11, 2025
What to do if the TA Service TA IQ RWD Wheelchair battery indicator blinks and sounds an alarm?
- KKelly RobertsAug 11, 2025
If the battery indicator blinks and an alarm sounds when you turn on the TA Service Wheelchair, it could be due to several reasons. First, check if one or both of the drive motors are set on push mode and move the drive/push mode levers on both sides to drive position. Also, make sure the connector of the drive motors is properly connected and inspect the connectors. If these steps don't resolve the issue, it may be an electronics issue and must be repaired at an authorised repair shop.


