Tab R6 - Preparation; Instructions

PREPARATION
INSTRUCTIONS
1
Remove the clean water
tank from the body.
2
Open it and fill with clean water.
3
Install the clean water tank
into the body.
4
Insert the brush into the handle.
Maximum water level
5
Fix the hose and power cord
before handling.
1
Plug in it.
2
Turn on the main switch.
3
Turn on the power to start.
4
Select suction power or
water temperature.
Turn on
Turn on
Suction switch
button
Temperature
switch button
Water spray button
Spray the stain with clean water to let it surface.
Do not spray continuously at the same spot.
After spraying, absorb the water, so as not
to cause mildew and odor.
Notice：Please spray the residual water in the pipe
before spraying hot water.
5
Press the water spray button
to spray clean water.
05
06