MAINTENANCEMAINTENANCE
2.Install the self-cleaning brush head on the handle, open the machine, directly put on the
brush head into the faucet for direct cleaning.
In order to maintain the performance of the product, please clean the dirty water tank regularly.
If there is more dirty water in the dirty water tank, the suction of this product will be weakened.
If the water level reaches the maximum water level, the dirty water tank should be cleaned in
time. After the dirty water tank is removed from the host, the internal dirty water and garbage
shall be poured out and cleaned.
● Dirty water tank cleaning：
Pull up the dirty water tank obliquely to remove the dirty water tank as a whole, then open the
buckle of the dirty water tank cover, open the cover and clean the dirty water tank.
● Disassembly method of dirty water tank：
Water adding method：Remove the clean water tank, open the water tank cover and add water.
Disassembly method of clean water tank：Pull up the clean water tank obliquely to remove
the clean water tank as a whole, then turn on the cover of the clean water tank and add water.
● Adding water to the clean water tank: When the clean water tank is short
of water, please add water in time：
1.When the cleaning brush is entangled with hair, use a tool to clean the hair or dirt on the
bristles.
2.When the cleaning brush is blocked, please remove the transparent cover above the cleaning
brush, and use chopsticks or other tools to clean the air duct inside the cleaning brush handle.
● Cleaning cleaning brush: When the cleaning brush is entangled by hair or
blocked by dirt, please clean and maintain it in time：
Self-cleaning
11
12
To Next Page
Loading...