Need help?Do you have a question about the TAC VISTA Xenta OP and is the answer not in the manual?
Details the manual's division into sections and explains typographic conventions for clear understanding.
Provides a general overview of the TAC Xenta OP and the contents of this handbook.
Describes the TAC Xenta OP panel and how to physically connect it to Xenta controllers.
Covers panel keys, operation, accessing the service menu, and system configuration options.
Explains communication modes, binding concepts, and procedures for removing the operator panel.
Guides on connecting to TAC Xenta 100 and performing basic dialog operations.
Details setting the node state and reading/checking Network Variables (NVs).
Explains how to initiate a service pin message from the operator panel.
Covers menu structures, time formats, and procedures for finding and changing setpoints.
Explains how to view, acknowledge alarms, and manage time channels and holiday charts.
Details access codes, overriding inputs/outputs, and setting daylight saving periods.
Provides key technical specifications including voltage, power, dimensions, and operating conditions.
Lists network communication protocols, standards compliance, and product part numbers.
General| Display Type | TFT LCD |
|---|---|
| Brightness | 250 cd/m² |
| Power Supply | 24 VDC |
| Mounting | Panel mount |
| Touch Screen | Resistive |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Power Consumption | 15W |
| Certifications | CE, UL |
To Next Page