Need help?Do you have a question about the TACKLIFE DM01M and is the answer not in the manual?
General| Counts | 6000 |
|---|---|
| Continuity | Yes |
| Diode Test | Yes |
| NCV | Yes |
| Auto Ranging | Yes |
| Digits | 3.5 |
| Display | LCD |
| Measurement Range (DC Current) | 0-10A |
| Resistance Range | 0-40MΩ |
| Battery | 2 x AAA (included) |
| Capacitance Range | 0-100μF |
| Frequency Range | 0-10MHz |
| Temperature Range | -20°C to 1000°C |
| Safety Rating | CAT III 600V |
Covers safety instructions, considerations, and symbols for safe operation of the multimeter.
Details maximum voltage limits and protective tube specifications for safe input measurements.
Illustrates the meter's layout and describes symbols on the LCD display for user recognition.
Explains the operation of each key and the purpose of each input socket on the multimeter.
Covers basic operations like hold mode, backlight, and auto power off for user convenience.
Provides detailed procedures and safety warnings for various measurements including voltage, resistance, and continuity.
Details measurement procedures for capacitance, frequency, and current, including specific safety notes.
Explains non-contact voltage detection, live line testing, and temperature measurement procedures.
Lists general operating environment, dimensions, weight, power, and display specifications.
Details the accuracy and resolution for DC voltage and other precision measurements.
Specifies accuracy and resolution for AC voltage, frequency, and electric resistance measurements.
Details accuracy and resolution for diode, beeper continuity, and capacitor measurements.
Lists accuracy and resolution for DC/AC current and temperature measurements, including overload protection.
Provides guidance on cleaning the meter's exterior and input sockets to ensure proper function and safety.
Details the procedure for safely replacing batteries and fuses in the multimeter.
To Next Page