Need help?Do you have a question about the TACKLIFE PJS04A and is the answer not in the manual?
General| Model | PJS04A |
|---|---|
| Category | Jigsaw |
| Voltage | 120 V |
| No-load speed | 800-3000 SPM |
| Stroke Speed | 800-3000 SPM |
| Stroke length | 1 inch |
| Weight | 5.29 lb |
| Blade type | T-shank |
| Orbital Settings | 4 |
| Dust Blower | Yes |
| LED Light | Yes |
| Tool-Free Blade Change | Yes |
| Power Source | Corded Electric |
| Cutting Depth in Steel | 3/8" (10 mm) |
| Cutting capacity in metal | 3/8" (10 mm) |
| Cutting Depth in Aluminum | 10mm |
| Bevel Capacity | 45 degrees |
Control for adjusting the cutting speed of the jig saw.
Primary control for powering the tool on and off.
The interchangeable cutting element of the jig saw.
Essential safety guidelines for preventing electric shock, injury, and fire.
Step-by-step guide for blade installation and removal.
Instructions for brief and continuous activation and deactivation.
Methods for selecting and setting the desired cutting speed.
Procedure for setting the base plate for bevel and angled cuts.
To Next Page
