Need help?Do you have a question about the TACKLIFE S3-50 and is the answer not in the manual?
General| Laser Class | Class II |
|---|---|
| Laser Type | 635nm, <1mW |
| IP Rating | IP54 |
| Power Source (Laser) | 4 x AA batteries |
| Measurement Range | 50m |
| Display | LCD |
| Unit Conversion | m/ft/in |
| Material | ABS |
Overview of the device's display screen elements and indicators.
Explanation of the device's button functions and operations.
Instructions for correctly installing the 1.5 V AAA alkaline battery.
Procedure for turning the laser distance meter on and off.
Guide to changing measurement units and the default unit.
How to alter the device's reference point using the designated key.
Instructions for setting a delayed measurement timer.
Details on automatic back light operation and manual sound on/off.
Procedure for ensuring device accuracy through self-calibration.
Steps for performing a single length measurement.
How to use and exit the continuous measurement mode.
Procedure for calculating the area of a surface.
Steps for measuring the volume of an object.
Using add/subtract for total area calculation of multiple surfaces.
Calculate legs by measuring hypotenuse and angle.
Calculate hypotenuse by measuring two legs.
Measure three points to calculate a leg's length.
Calculate leg using two hypotenuses and one leg.
How to perform addition and subtraction of measurements, including area and volume.
Instructions on how to save measurement results, including Area, Volume, and Pythagoras modes.
How to view, delete recent, or clear all recorded measurements.
Information on displaying and the range of angle measurements.
Explanation of common error messages, their causes, and solutions.
Using a target plate to increase measurement range in daylight or poor reflection.
Details on typical tolerance factors and formula.
Guidelines for storing and cleaning the device to ensure longevity.
To Next Page
