Need help?Do you have a question about the TACKLIFE CM02A and is the answer not in the manual?
General| Model | CM02A |
|---|---|
| Category | Measuring Instruments |
| Type | Laser Distance Meter |
| Accuracy | ±2 mm |
| Laser Class | Class II |
| Laser Wavelength | 635 nm |
| Laser Type | Red Laser |
| Power Supply | 2 x AAA batteries |
| Backlit Display | Yes |
| Auto Laser Shut-off | Yes |
| Auto Power Shut-off | Yes |
| Display | LCD |
| Material | Plastic |
| Measuring Range | 0.05 - 40 m |
| Units | m / in / ft |
| Auto Power Off | 150s |
| Weight | 100g |
| Operating Temperature | 0 to 40°C |
| Storage Temperature | -10°C - 50°C |
User preparation, checking for damage, and explanation of safety symbols.
Procedures for maintaining the instrument, including cleaning and power off.
Identifies and describes the main parts of the digital AC clamp meter.
Details the functions of each position on the rotary switch for measurement selection.
General overview of the instrument's features, capabilities, and operating conditions.
Detailed technical specifications and measurement ranges for various functions.
Instructions for using the reading hold and backlight functions of the meter.
Explains the auto shutdown feature, its activation, and how to disable it.
Step-by-step guide for measuring AC current using the clamp meter.
Instructions for connecting and measuring DC voltage with the meter.
Instructions for connecting and measuring AC voltage with the meter.
Procedure for measuring low resistance values using the meter.
How to measure electric resistance and use the buzzer for continuity testing.
Steps for measuring capacitance using the meter.
Instructions for measuring temperature using the thermocouple probe.
Detailed steps and warnings for replacing the instrument's batteries.
Warnings regarding battery polarity and safety of test probes.
To Next Page
