TACKLIFE T8 Pro - Charging the Jump Starter; Charging Methods; Jump Starting a Vehicle; Connection Procedure

Firstly, plug the blue end of the jump clamps
into the host of T8 Pro.
Secondly, connect the jump clamps with the
car battery, red to positive (+) battery terminal
and black to negative (-).
Then operate with the following instruction:
Steps To Charge The T8 Pro
1.
2.
OR
1.
2.
How To Jump Start 12V Vehicles
Plug the wall charger into the universal socket.
Plug the end of the wall charger into the 15V input port of T8 Pro.
Plug the car charger into the socket of cigarette lighter.
Plug the end of the car charger into 15V input port of T8 Pro.
- 03 -
REVERSE CORRECT BOOST
REVERSE CORRECT BOOST