Tacony Simplicity S65 - Filter Replacement

11
MAINTENANCE AND CARE
NOTE: Always turn off the vacuum and
remove the battery before performing
any service.
Replacing the Filter
1. Lift up the filter release knob and
remove the filter holder from the main
body (Fig. 1).
2. Turn the filter counter-clockwise to
remove from the filter holder (Fig. 2).
3. Replace with a new filter turning it
clockwise until it snaps into the filter
holder.
4. Replace the filter holder into the main
body (Fig. 3).
NOTE: Filter cannot be washed and reused.
Fig. 2
Fig. 1
Fig. 3