2
11
The Rise FPV Goggles are designed to hold the HD Color Monitor for
a more immersive view from the Vusion FPV camera. The goggles
can also be used with mobile devices that are less than 5.9" x 3.15"
to watch videos.
To access the compartment for the monitor, pull on the cover tab. Place
the monitor or mobile device in the compartment and close the cover.
NOTE: To avoid damage to the monitor or mobile device, do not install the
device until the FVP camera is turned on and remove it when the session
is completed.
Pulling the FOV Lever on top of the goggles closer to your eyes will slightly
expand the eld of view for use with devices that have a large screen.
The length of the straps can be adjusted by moving the hook and loop pad at the end of each strap.
The goggles are large enough that reading glasses can be used if needed to sharpen the image from the
monitor.
DIMENSIONS
Width: 200mm
Height: 114mm
Depth: 170mm
Weight: 480g
REPLACEMENT PARTS
TACZ5610 FPV-G1 Head Strap
TACZ5612 FPV-G1 Face Plate Foam
FPV GOGGLES (AVAILABLE SEPARATELY)
FOV Lever
Cover Tab
Strap
Adjustment
To Next Page
Loading...
General