Need help?Do you have a question about the TAG Heuer CALIBRE 16 and is the answer not in the manual?
General| Movement | Automatic |
|---|---|
| Case Material | Stainless Steel |
| Case Diameter | 41 mm |
| Water Resistance | 100 meters |
| Functions | Chronograph, Date |
| Crystal | Sapphire |
| Power Reserve | 42 hours |
| Frequency | 28, 800 vibrations per hour (4 Hz) |
| Jewels | 25 |
| Bracelet/Strap | Stainless Steel |
Details what problems are covered under the two-year limited guarantee against manufacturing defects.
Outlines essential conditions for the limited guarantee to be honored, including proof of purchase and dealer validation.
Specifies damages and issues not covered by the limited guarantee, such as external service or improper handling.
Explains general conditions, legal rights, and recommendations for sending the watch for service.
Describes the self-winding automatic movement and its power reserve.
Lists the technical features of the TAG Heuer chronograph, such as water resistance and materials.
Provides guidelines for cleaning the watch using fresh water and soap, especially after salt water exposure.
Explains the appearance of condensation under the crystal and when to consult a dealer.
Recommends annual checks of water-resistance and seal replacement by a dealer.
Discusses anti-reflective coating on crystals and wear-and-tear marks not covered by warranty.
Advises on restarting a stopped automatic movement and recommends periodic servicing.
Addresses potential deterioration of gold plating due to contact with hard surfaces.
Offers care advice for leather straps and metal bracelets, including cleaning and strap material origins.
Identifies numbered and lettered components of the watch as shown in Figure 1.
Lists the specific functions of the chronograph sub-dials and buttons.
Details the steps for setting the time, date, and day using the crown positions.
Guides on how to perform single timing measurements using the chronograph buttons.
Explains how to measure cumulative times using the chronograph.
Explains the purpose and operation of the unidirectional turning bezel for dive time measurement.
Details how to use the tachymeter scale on the fixed bezel for measuring average speed.
Describes the function of the automatic helium escapement valve for divers.
Explains what a TAG Heuer Chronometer certification means and its verification process.
To Next Page