To Next PageTo Next Page
Need help?Do you have a question about the TAG Heuer HL3 Series and is the answer not in the manual?
General| Brand | TAG Heuer |
|---|---|
| Model | HL3 Series |
| Category | Security Sensors |
| Language | English |
Details the HL 3-000 infra-red transmitter with High/Low positions for adjusting transmission intensity.
Explains the HL 3-100 wireless photocell with 100mW transmission and Impulse/Direct modes.
Describes the Wireless Kit configuration using HL3-100 and HL2-112 with a functioning distance up to 20m.
Details the Dual Wireless Photocell setup with two HL3-100 and two HL3-000 units, up to 80m range.
Explains the Single Wireless Photocell configuration with one HL3-100 and one HL3-000, up to 80m range.
Instructions for switching on the HL3-000 transmitter, battery status indication, and adjusting transmission distance.
Details operating the HL3-100 photocell, including Team/Channel status, Impulse/Direct modes, and battery status.
Guide to configuring the TEAM number on the HL3-100 photocell using the select button and power switch.
Instructions for changing the transmission mode (IMPULSE/DATA) on the HL3-100 photocell.
Describes how to align the HL3-000 transmitter, indicating status with a light.
Explains how to align the HL3-100 photocell, confirming alignment when the LED is Off.
Explains the principle of operation for the HL3-X photocell system, focusing on infra-red detection.
Details functioning distances and maximum operational range under ideal conditions.
Provides estimated battery life for components and specifies transmission power.
States timing precision, lists physical dimensions, and indicates operating frequency.
