Taga Harmony TSW Series User Manual

Active Subwoofers
AUDIO-VIDEO (TSW, VIGOR) / inMOVE Series
Instruction Manual
Edition 04-18

Taga Harmony TSW Series Specifications

General

Type	Subwoofer
Series	TSW
Driver Size	12 inches
Frequency Response	25Hz - 150Hz
Enclosure Type	Bass-reflex

Summary

Safety Instructions

Electric Shock and Fire Hazards

Warnings about electric shock, fire risk, moisture, and not opening the unit.

Plug and Ventilation Precautions

Guidance on proper plug insertion and ensuring adequate unit ventilation.

Important Safety Precautions

General Usage and Environmental Safety

Covers reading instructions, heeding warnings, water/moisture, and ventilation.

Power, Grounding, and Overload Safety

Details power sources, plug polarization, and avoiding circuit overloading.

Servicing, Damage, and Part Replacement

Guidance on when to refer servicing to qualified personnel and part replacements.

Mounting and Heat Management

Recommendations for safe mounting and positioning away from heat sources.

Unpacking the Subwoofer

Controls and Displays - Rear Panel

Power Switch and Fuse

Input Ports and Power Status

Audio Adjustment Controls

Auto Power and High Input

Hooking Up The Subwoofer

LFE (SUB OUT) Connection

Recommended connection using a single or Y-type RCA subwoofer cable.

Stereo RCA Output Connection

Using regular stereo RCA outputs (L/R) with single or Y-type RCA cables.

Speaker Output Connection

Operation

Powering On and Status LED

Auto Power Modes

Crossover and Phase Adjustment

Volume Control and Distortion Warning