TAGSYS RFID Textile L100 User Manual

Textile L100 Reader
User's Guide
Revision 3.5
December 2007

TAGSYS RFID Textile L100 Specifications

General

Frequency	13.56 MHz
Power Supply	5V DC
Air Interface Protocol	ISO 15693, ISO 18000-3
Weight	200 g
IP Rating	IP54
Communication Interface	RS232
Compliance	CE, FCC

Summary

1 For Your Safety

1.1 General Use

Basic guidelines for handling the reader safely and correctly.

1.2 Care and Maintenance

Recommendations for maintaining the device to ensure longevity.

1.3 Important Safety Information

1.3.1 Operating Environment

Safety considerations for device placement and environmental conditions.

1.3.2 Electronic Devices

Safety advice regarding interference with other electronic devices.

2 Certification

2.1 Occupational Health and Safety Notices

Notices related to worker safety and compliance with health standards.

2.2 Regulatory Notices

Information on compliance with various national and international regulations.

3.2.1 RF Channels

3.2.3 I/O Port Connector

3.2.7 Antennas

4 Architecture

4.1 Software Overview

4.2 On-Board Application Software

5 Antennas

6 Installation

6.1 Mechanical Aspects

Guidance on physical mounting and placement of the reader unit.

6.2 Cabling Requirements

Specifications and recommendations for connecting cables for optimal performance.

7 Operating Modes

7.1 STX On-Board Application with Standalone Mode

7.1.1 Reader Parameters

7.1.2 Channel Settings

7.1.3 Multiplexing Configuration

7.3 Sorting Mode

7.4 Reading Mode

8 I/O Ports

8.1 Standard STX Standalone Module

8.2 General Purpose I/Os

8.2.1.1 Input Configuration

8.2.1.2 Output Configuration

8.2.2 Input Configurations

8.2.3 Output Configurations

9 Calibration

9.1 Calibrating the Trigger Threshold Value

Procedure for optimizing reading performance by adjusting the trigger threshold.

10 How to Improve Performance

10.1 Verification of TR-L100 Reader Performance

10.2 Antenna Tuning Procedure

10.3 Upgrading the Firmware

11 Debugging

11.1 Debugging Tools

12 Technical Specifications

12.1 Technical Specifications

12.2 Serial Port Pin Assignment

13 Electrical Characteristics

13.1 Absolute Maximum Ratings

13.3 Power Supply DC Characteristics

13.4 Communication Link DC Characteristics and Timing

13.5 Antenna Electrical and Timing Characteristics

13.6 I/O Electrical and Timing Characteristics