Section 3
QUICK START GUIDE
Note: This guide covers multiple models. The details of your
particular board/boat and accessories may vary from these
instructions.
For more detailed information please scan the QR Code to
watch the video version of this User’s Manual or visit www.tahesport.com
Sec 3.1
INFLATING YOUR BOARD:
STEP 1: Unroll your board, paying attention to how
it was rolled up. This will help you when deflating
and re-packing your board.
STEP 2: Attach the hose to the inflation
pump ensuring that the hose is threaded
properly and attached securely to the end
that says “INFLATE”.
STEP 3: Unscrew the valve cap from the valve
located at the tail of the board. You will see a
white push-pin in the center of the valve. Press the
pin a few times to see how the pin changes
position from “UP” to “DOWN”. For inflating the
pin must be in the “UP” position.
To Next Page
Loading...