Sec 3.2
PADDLE ASSEMBLY:
(your paddle may vary from this description)
STEP 1: Unpack all paddle components
STEP 2: Connect the piece with the paddle
blade to the center shaft piece.
STEP 3: For Paddle Board use connect the T-
Grip handle portion. For Kayak use connect the
other paddle blade to the center shaft piece.
STEP 4: For paddle board use, the paddle can
be adjusted to fit the rider height – using both of
your thumbs, push the adjustment clip open
and adjust the T-Handle to your preferred
height. The paddle should be be around 8
inches taller than the user.
To Next Page
Loading...