Name: Tahoe 4681
Brand: Tahoe
Rating: 5 (1 reviews)

Questions and Answers:

J
jason16Jul 27, 2025
What to do if Tahoe 4681 Network Card modems are synchronized, but no data flows?
- G
  Gerald RandallJul 27, 2025
  If your Tahoe Network Card modems are synchronized but no data is flowing, here are a few things you can check: * If a transparent bridge is required, verify that it is enabled. * Make sure the Noise Margin (Signal/Noise Ratio) is greater than or equal to 6 dB. If the NMR is too low, decrease the line throughput. * Check the LAN cables. * Issue the 'mii reset' command to reset the Ethernet interface.
P
Paul SotoAug 6, 2025
Why do Tahoe 4681 modems lose synchronization from time to time?
- O
  Oscar StricklandAug 6, 2025
  If your Tahoe Network Card modems are losing synchronization intermittently, consider the following: * Ensure the Noise Margin (Signal/Noise Ratio) is at least 6 dB. If it's lower, reduce the line throughput. * Try replacing the leased line, or at least parts of it, as there might be loose connectors, damaged insulation, or other temporary line issues. * Verify that both wires of a twisted pair are connected to the correct pins on the same line, since a telecom line consists of two twisted wires.
S
Shane MendozaAug 15, 2025
How to fix asymmetrical throughputs on Tahoe 4681 Network Card?

Tahoe 4681 Specifications

General