EasyManua.ls Logo

Tahoe T../MA-BTB series - User Manual

Tahoe T../MA-BTB series
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
For models T../MA-BTB, T../MA-BTBC and T../MA-ANJ
INSTALLER’S MANUAL
THIS MANUAL IS TO BE LEFT WITH THE OWNER OF THE EQUIPMENT FOR REFERENCE
PURPOSES AND TECHNICAL GUIDANCE. IT IS STRONGLY RECOMMENDED THAT QUALIFIED
DEALER SERVICE PERSONNEL BE CONTACTED IN THE EVENT OF AN UNKNOWN INTERRUPTION
OF SERVICE OR APPARENT PRODUCT MALFUNCTION. AN ANNUAL PREVENTATIVE
MAINTENANCE INSPECTION BY A WATER PROFESSIONAL IS RECOMMENDED TO ENSURE
TROUBLE-FREE AND CONTINUOUS OPERATION.
R1
Question and Answer IconNeed help?

Do you have a question about the Tahoe T../MA-BTB series and is the answer not in the manual?

Summary

TAHOE Water Softener Installer Manual Introduction

Control Valve Specifications and General Instructions

Control Valve Specifications

Detailed technical specifications including flow rates, pressure, and temperature limits.

General Operating Instructions

Important guidelines for operating and programming the control valve.

Cycle Sequence Overview

Explanation of the available regeneration cycles and their configuration.

Softener System Setup and Cycle Configuration

Cycle Options and Setup Procedure

Details on available softener cycles and the process for setting them up.

Softener System Setup Options and Settings

Setting Options Table Guide

Reference table for selecting regeneration time, volume capacity, and day override.

Bypass Valve Operation and Positions

Bypass Valve Positions

Details on Normal, Bypass, Diagnostic, and Shut-Off positions for valve operation.

Water Softener Installation Procedures

Site Requirements for Installation

Necessary conditions for water pressure, temperature, and electrical supply for installation.

Plumbing and Drain Line Installation

Instructions for connecting water supply lines and the drain line.

Installer Settings Configuration Guide

Installer Settings Steps

Guides through setting hardness, day override, and regeneration time parameters.

Installer Settings and Time of Day Setup

Energy Saver and Time of Day Settings

Configuration for energy saver mode and setting the unit's current time of day.

System Operation Displays and Modes

Normal Operating Displays

Information on capacity, flow rate, and salt level displays.

Regeneration Modes and Power Handling

Details on regeneration modes, manual regeneration, and power loss behavior.

Start Up and Initial Testing Procedures

Start Up Instructions

Step-by-step guide for bringing the unit online after installation.

Replacement Parts - Drive Assembly and Piston

Drive Assembly and Front Cover Parts

Parts for the front cover, drive mechanism, and associated hardware.

Piston Assembly Components

Components related to the water softener piston assembly.

Replacement Parts - Injector and Refill Port

Injector Assembly Parts List

Parts list for the injector cap, screen, plug, and various injector types.

Refill Port Assembly Parts List

Components for the brine tank refill port, including flow control.

Replacement Parts - 3;4 Drain Line Assembly

3;4 Drain Line Components

Parts list for the 3/4 inch drain line connection, including DLFCs.

Replacement Parts - 1 Drain Line Assembly

1 Drain Line Components

Parts list for the 1 inch drain line connection, including DLFCs.

Replacement Parts - Meter and Bypass Valve

Water Meter and Plug Components

Components for the water meter assembly and its plug.

Bypass Valve Components List

List of parts for the bypass valve assembly, including rotors and caps.

Installation Fitting Assemblies and Tools

Installation Fitting Assemblies

Details on various types of plumbing fittings required for installation.

Service Wrench Usage

Information on the specialized wrench for valve assembly and disassembly.

Service Instructions - Drive Assembly Maintenance

Drive Assembly Removal and Reassembly

Procedure for removing and reinstalling the drive assembly from the control valve.

Service - Drive Cap, Piston, and Spacer Stack

Drive Cap, Piston, and Regenerant Piston Service

Guidance on servicing the drive cap, main piston, and regenerant piston.

Spacer Stack Assembly Service Guide

Steps for inspecting, cleaning, and replacing the spacer stack assembly.

Service - Injector, Refill Port, and Water Meter

Injector Service Procedures

Service steps for injector cap, screen, plug, and injector itself.

Refill Port and Water Meter Service

Instructions for servicing the refill flow control and water meter.

Bypass Valve Service and Maintenance

Bypass Valve Rotor Service

Detailed steps for accessing and servicing the bypass valve rotors.

Troubleshooting Water Softener Issues

Troubleshooting Problem Table

Lists common problems, their causes, and recommended solutions for the unit.

Tahoe T../MA-BTB series Specifications

General IconGeneral
BrandTahoe
ModelT../MA-BTB series
CategoryWater Dispenser
LanguageEnglish