Need help?Do you have a question about the Tahoe TI9000LXU and is the answer not in the manual?
Check machine oil level by inserting the oil plug gage into the filling hole without turning. Refill if low.
Check fuel level using the fuel indicator. Refill if low, avoiding overfilling.
Remove the filter cover and check the filter element for cleanliness and integrity. Clean if dirty.
Check electrolyte level in each cell to ensure it is between the upper and lower limit lines.
Follow steps for starting the generator using the kick starter, including choke and engine switch operation.
Follow steps for starting the generator using the electric start system, including breaker, fuel valve, and choke.
Ensure total electric load does not exceed rated power. Connect loads from largest to smallest. Avoid overloading.
Steps for using AC power: starting engine, checking voltage, connecting devices, and using the AC breaker.
Turn off the AC breaker, engine switch, remove all loads, and close the fuel valve to stop the generator.
Procedure for draining old oil, refilling with fresh oil, and checking the oil level. Capacity is 1.1L.
Steps to remove, clean, and check the spark plug gap. Specifies gap as 0.7-0.8mm.
Procedure to close the fuel valve, remove, clean, and remount the fuel filtering cup and screen.
Steps for storing the generator, including draining fuel, cleaning, refilling oil, and placing in a clean area.
Steps to troubleshoot why the engine cannot start, checking fuel, oil, and spark plug.
Troubleshooting steps for when there is no voltage output, checking the circuit protector and spark plug.
Details key specifications including voltage, output, engine model, bore/stroke, fuel/oil capacity, and dimensions.
Instructions for mounting the battery unit, connecting cables, and securing the battery with bolts and nuts.
Instructions for connecting battery poles, starting the engine, and checking charge. Warns against reverse connection.
Guidelines for charging the battery, including using the generator's system or an external charger, and voltage limits.
Advice on preventing overdischarge, periodic charging, cleaning terminals, and avoiding short circuits.
Detailed steps for attaching wheels to the axle, securing with pins, and placing the generator.
Instructions for attaching frame supports to the generator base and installing the handles.
Explains the automatic generator's features, self-start, and choke adjustment for temperature.
Diagram illustrating the electrical connections and components of the automatic generator system.
Details inspection, connection, and conditions for automatic generator operation (stand-by, controlled, alarming).
Important notices for maintenance, including switch positions, long-term storage, and wiring standards.
Explains the meaning of different indicator lights: stand-by, power outlet, and alarming.
Lists technical specifications like startup intervals, ignition control time, and temperature configuration.
General| Fuel Type | Gasoline |
|---|---|
| Run Time at 50% Load | 10 Hours |
| Wheel Kit | Included |
| Starting System | Electric Start |
| AC Output | 120V/240V |
| DC Output | 12V |
| Outlets | 1x 12V DC |
| Engine Type | 4-stroke OHV |
To Next Page