Do you have a question about the Taigen Tanks Russia KV-1 13000 and is the answer not in the manual?
Scale | 1/16 |
---|---|
Material | Metal and Plastic |
Type | RC Tank |
Radio | 2.4GHz |
Sound | Yes |
Smoke | Yes |
BB Shooting | Yes |
Power | Electric |
Regulations regarding the use of radio control devices in different countries.
Declaration of conformity with EU directives for radio control models.
Guidelines for proper disposal of batteries and electronic parts.
Information on how to contact customer service for product questions or complaints.
Step-by-step instructions for charging the battery pack.
Instructions for separating the upper and lower hull sections of the tank.
Instructions for assembling the upper and lower hull sections of the tank.
Guide on how to insert, remove, and connect the battery pack.
Information on the operating range of the remote control.
Correct sequence for switching the remote control and tank on and off.
Explanation of the code-binding process for remote control and receiver.
Overview of the tank's switches and adjustment controls.
Procedure for starting up the tank and remote control.
Description of the various sound functions of the tank model.
Instructions on how to adjust the left/right trim for precise steering.
Guide on how to perform the Super Spin maneuver.
Instructions for turning the tank turret to the left.
Instructions for turning the tank turret to the right.
How to operate the gun barrel to move up and down.
Guide for firing BB bullets, applicable only to the Airsoft version.
Explanation of the hop-up system and its effect on shooting distance.
Instructions for setting up the target for practice.
Details on supplementary functions of the IR battle system.
Special usage notes and tips for the infrared battle system.
Instructions for operating the smoke function of the tank.
Guide on how to refill smoke oil inside the tank.
Reasons for warranty exclusion and cases not covered by the guarantee.
Procedure for performing code-binding if necessary.
Details on pin slot configurations on the receiver circuit board.