Power cycle routine
Powering on the Extreme from cold state and booting up
The Extreme has a rear panel power switch and a front panel start button. The turning on from cold sequence
is as follows
1. Turn rear panel power switch on
2. Press the front panel start button momentarily
3. The front panel button should be illuminated immediately and stay on. The operating system boot and
software startup should take about 25 seconds
Shutting down the Extreme
1. Press – release – press the front button
Complete power off of the Extreme to cold state
1. After the completion of the front panel button panel shutdown (light goes off), turn off the rear power
switch
Taiko Audio Extreme Manual (English), v1.0 9
To Next Page
Loading...