To Next PageTo Next PageHow to check IP address on Tainet VENUS 2916 Gateway?
If the DHCP client mode is enabled, check the DHCP server to find the exact IP address assigned to the gateway. Ensure there's an available IP address on the DHCP server. If a static IP address is enabled, verify that the net mask and the default Gateway are set correctly.
How to check WAN interface on Tainet VENUS 2916?
If you're using the 10/100Base-T Fast Ethernet port, check if the 10/100BT LED is on. Verify that you are using the correct Ethernet cable. When connecting the VENUS 29xx Series directly to another Ethernet port of a network node, use a cross cable instead of a straight cable.
What to do if voice quality is poor on Tainet VENUS 2916?
Poor voice quality can result from several factors: low WAN link throughput, which fails to provide sufficient bandwidth for voice traffic; network congestion; or network device delay. Also, the selected voice codec significantly impacts voice quality; higher compression codecs offer fair quality and consume less bandwidth but demand more CPU/DSP power, increasing voice latency. A good network configuration in advance is very important. A well maintained network flow control policy or protocol help to control the traffic and prioritize the service for different type of media.
What to do if no tone is heard on Tainet Gateway?
Check if the LED of the telephone port is turned ON.
General| Category | Gateway |
|---|---|
| Model | VENUS 2916 |
| Ports | 16 |
| Protocols | HTTP |
| Power Supply | AC 100~240V, 50/60Hz |
| Dimensions | 440mm x 44mm |
| Operating Temperature | 0°C |
| Humidity | 10% to 90% non-condensing |
Provides a comprehensive overview of the VENUS 29xx Series VoIP Gateway and its capabilities.
A guide to perform basic VoIP service configuration quickly on the VENUS 29xx Series.
Details alternative methods for initial device setup, including login and network/SIP settings.
Details various configuration menus for system parameters, interfaces, SIP, advanced settings, and data.
Tools and procedures for system maintenance, including fault, performance, diagnostics, and device control operations.
Step-by-step procedures and common issues encountered during the operation of the VENUS 29xx Series.
