Need help?Do you have a question about the Tait TM9000 and is the answer not in the manual?
General| Operating Voltage | 13.6 V DC |
|---|---|
| Digital Protocol | DMR, P25 |
| IP Rating | IP54 |
| Frequency Bands | VHF, UHF |
| Channel Spacing | 12.5 kHz, 25 kHz |
| Operating Temperature | -30°C to +60°C |
| Type | Mobile |
| Frequency Range | 136-174 MHz (VHF), 400-470 MHz (UHF) |
| Voltage Range | 10.8 to 16 V DC |
Describes the TA2922 board's function as an interface between radios and external lines.
Lists the technical specifications and electrical parameters of the TA2922 interface board.
Explains the balanced and unbalanced audio input and output circuits.
Provides step-by-step instructions for installing the interface board into the radio.
Details how to preset line input and output audio levels using potentiometers VR1 and VR2.
Describes the configuration of signals for the external D-range connector SK1.
Guides on configuring the board using the standard radio programming application.
Details how to program the board using the dedicated PGM-UIS application.
To Next Page
