EasyManua.ls Logo

Tait TP8000 Series - LED Indicator Guide; Understanding LED Behavior

Tait TP8000 Series
75 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Battery Charging Guide 11
English
LED behavior
If there is a battery in the charger when power is supplied to the
charger, the LEDs behave as follows:
If the charger does not behave as expected:
Make sure the radio or battery is seated properly in the charger.
For the vehicle charger, see also
"Inserting the radio into the
vehicle charger"
.
Check that the charger is properly plugged into the originally
supplied power supply.
Check that the battery and charger contacts are clean. To clean,
wipe the contacts with a dry lint-free cloth to remove any dirt, oil
or grease.
Meaning
briefly
The charger has been connected to a power supply.
steady
The battery is charging.
steady
Charging complete. Remove the battery, or leave it in the
charger.
steady
The battery temperature is outside the normal
charging range. Charging will start or resume once
the temperature is within normal limits. No action is
required by you.
There is a fault. Contact your dealer.
or
flashing
If the LEDs for all charger slots continuously flash
orange, or red then orange, the charger itself may be
faulty (e.g. the 6-way charger fan may be jammed).
Contact your dealer.
all off
There is a fault. Contact your dealer.

Related product manuals