Tait TP8000 Series User Manual

Battery Charging Guide 5
English
6-way charger safety information
Warning This device must be connected to an earthed mains
socket-outlet.
Norsk (no): Apparatet må tilkoples jordet stikkontakt.
Suomi (fi): Laite on liitettävä suojamaadoitus-koskettimilla
varustettuun pistorasiaan.
Svenska (sv): Apparaten skall anslutas till jordat uttag.
Special conditions when using IS/NI radios
Intrinsically safe (IS) and non-incendive (NI) radios and accessories
are certified by a third party to be safe to use in particular hazardous
locations, or in potentially explosive atmospheres.
Warning Explosion hazard! Use only a Tait-supplied, IS/NI
approved battery and charger with an IS/NI radio. Fitting a battery or
using a charger that is not IS/NI-approved creates a risk of explosion
which could cause serious injury or death. For an up-to-date list of
approved accessories, contact your regional Tait office.
Warning Explosion hazard! Do not charge the battery in a
hazardous location. An explosion could cause serious injury or death.
For detailed information about IS/NI radios and accessories, refer to
the Safety and Compliance Information provided with the radio:
■ MTA-00011-xx for TP8100
■ MPD-00013-xx for TP9300 and TP9400 with ATEX and IECEx
certification
■ MPD-00027-xx for TP9300 and TP9400 with AEx, Ex, and non-
incendive certification

Tait TP8000 Series Specifications

General

Brand	Tait
Model	TP8000 Series
Category	Two-Way Radio
Language	English