Operation 44
5 Select Connect.
The display shows Connecting to <device>.
Your Bluetooth device may require additional steps to
complete the pairing. Refer to the documentation of
your Bluetooth-enabled device.
If successful, the radio display shows <Device>
Connected. A tone sounds and √ appears beside the
connected device. The Bluetooth Connected icon
appears on the status bar, or
if unsuccessful, the radio display shows Connected
Failed.
No-key no-display radio
1 Turn on your Bluetooth device and place it in
pairing mode. Refer to the documentation of your
Bluetooth device.
2 On your radio, press the function key programmed
for Bluetooth Connect.
A tone sounds and the LED blinks orange.
Your Bluetooth device may require additional steps to
complete the pairing. Refer to the documentation of
your Bluetooth device.
If successful, a positive tone sounds, or
if unsuccessful, a negative indicator tone sounds.
To Next Page
Loading...
