Need help?Do you have a question about the Takagi CP-30 and is the answer not in the manual?
Guidelines for unit placement to avoid humidity, dust, direct sunlight, and vibrations.
Instructions for careful handling of the main unit and remote control to prevent damage.
Advice on keeping the unit clean using dust covers and soft cloths.
Manufacturer's disclaimer for issues arising from misuse or unauthorized repairs.
Identification and brief description of the main unit's parts and features.
Details about the tabletop base, stand pole, and wall-mount arm.
Overview and function of the remote control unit.
Explanation of symbols used in the manual and on the unit.
Steps for physically installing the main unit.
Instructions for connecting the power cord to the unit and outlet.
Guidance on setting up the projection screen.
Procedure for inserting batteries into the remote.
Steps for adjusting the test chart size for proper projection.
How to turn the unit on and off using the power switch.
Method for adjusting the focus of the projected image.
Detailed instructions for using the remote control functions.
How to turn the projection lamp on and off using the remote.
How to select and display test charts using the remote.
Instructions for using masks and filters with the projector.
How to present visual acuity charts sequentially.
Steps for programming custom chart and mask sequences.
How to play back programmed sequences of charts and masks.
Procedure to disable the buzzer sound from remote keys.
Automatic shutdown feature of the projector after inactivity.
Information on different transmission codes for the remote controller.
Procedure for replacing the main projection lamp.
Steps for replacing batteries in the remote controller.
Instructions for replacing blown fuses.
Lists test chart combinations for the 2-TYPE disk.
Lists test chart combinations for the 4-TYPE disk.
Lists test chart combinations for the 5-TYPE disk.
To Next Page
General