Need help?Do you have a question about the TaKo Electronics EBi Direct Interpolation DAC and is the answer not in the manual?
Digital Audio Input| coaxial terminal impedance | 75Ω |
|---|---|
| coaxial terminal voltage | 0.5V p-p |
| optical terminal range | -24.0 to 14.5dbm peak |
| usb port | type B connector |
| supported sampling frequency (coaxial, optical) | 32, 44.1, 48, 88.2, 96Khz |
| supported sampling frequency (usb) | 44.1/48Khz |
Analog Output| rca unbalanced output | 1.75Vrms (1Khz, full scale, 10KΩ) |
|---|---|
| output impedance | 560Ω |
| frequency response | 5Hz to 40Khz |
| signal to noise ratio | 96db |
| total harmonic distortion | 0.032% (1Khz) |
General| power supply | AC100~120V, 200~240V selectable |
|---|---|
| power consumption | approx 10W |
| operating temperature | +5°C to 35°C |
| dimensions | 160x220x40mm (WxDxH) |
| weight | 1.3Kg |
Provides a step-by-step guide for connecting and operating the EBi DAC for the first time.
Details the power button, input cycling, and power indicator functionality.
Explains the buttons for switching between non-oversampling/direct interpolation modes and adjusting polarity.
Provides detailed technical specs for digital inputs, analog outputs, and supported sampling frequencies.
Lists power supply, consumption, operating temperature, dimensions, and weight of the EBi DAC.
To Next Page